Fall Protection Blog
Anchored vs Non-Penetrating Guardrail: How to Choose
Non-penetrating guardrail clamps to a parapet or sits on weighted bases, without drilling the roof membrane. Anchored guardrail is bolted into the parapet or the structure. Which one belongs on your roof depends on how the parapet is built, what the membrane…
Read the article →Fall Protection Blog
Rigid Rail vs Cable Lifeline: How to Choose
Choose rigid rail when the clearance below the worker is tight, the work is overhead, or several people work close together. Choose a cable horizontal lifeline when the run is long and there is room below for the line to deflect. Tritech…
Read the article →Fall Protection Blog
When Can a Parapet Be Used as a Guardrail?
A parapet can serve as the guardrail only when its top edge sits 42 inches, plus or minus 3 inches, above the surface workers walk on, and it can withstand 200 pounds of outward or downward force at the top (29 CFR…
Read the article →Fall Protection Blog
Issues with Fragmented Fall Protection Programs
Significant fall incidents do not happen often, but when they do, the physical and emotional toll is catastrophic. While we often look for a single, disastrous mistake in the wake of an accident, the reality…
Read the article →Fall Protection Blog
The Heavy Responsibility of Growth: Why Safety Must Scale with Production
When manufacturing facilities increase production, add shifts or bring new personnel onto the floor, their safety programs need to keep pace. Changes to equipment, access routes and maintenance tasks can introduce hazards that an earlier…
Read the article →Fall Protection Blog
OSHA Fall Protection for Facility Managers: General Industry and the 2026 Citation Rankings
For facility managers, fall protection starts with the work being performed. General-industry tasks are covered by applicable Occupational Safety and Health Administration (OSHA) requirements in 29 CFR 1910. Construction work is covered by applicable 29…
Read the article →Fall Protection Blog
Roof Edge Fall Protection: Controlling One of the Most Common Rooftop Hazards
Roof edges are consistently among the most dangerous fall hazards at any commercial or industrial facility. Any worker who accesses a rooftop—for any reason—is exposed without proper protection. Here’s what facility managers, EHS professionals, and contractors need to know to stay OSHA-compliant.
Read the article →Fall Protection Blog
Fall Protection for Data Centers: Keeping Workers Safe in the AI Infrastructure Boom
Data center construction is the fastest-growing segment in the entire U.S. construction industry with over $88 billion in projects starting in the first half of 2026 alone. But with that boom comes a critical challenge most facilities overlook: fall protection compliance. Here's…
Read the article →Fall Protection Blog
5 Critical Fall Protection Failures That Put Workers at Risk (And How to Prevent Them)
TL;DR Most fall protection failures come down to preventable mistakes: using unverified anchor points, miscalculating fall clearance, skipping inspections, choosing the wrong system for the hazard, and sending workers to height without proper training or competent oversight. Preventing serious incidents requires more…
Read the article →Fall Protection Blog
Crossover Platforms for Fall Protection: OSHA Requirements, Types, and Selection Guide
TL;DR Crossover platforms provide a safe, permanent way for workers to pass over floor-level obstacles like pipes, conveyors, and machinery. Instead of climbing or taking unsafe shortcuts, workers use a structure with built-in guardrails, stairs or ladders, and slip-resistant surfaces. OSHA requires…
Read the article →